Some initial review on IP 3.6
Some of you may already know, but i would like to show some interesting features on IP 3.6
When you open the test well-1 from IP and choose the triple combo plot from file>program default plots>triple combo, you should see like above image. In the left panel, there have several default x-plotting feature from IP. You can see some high resistivity log possible HC character at 7800 ft and 8300 ft. But hard to identified on type of HC (oil or gas) in this plot. For a quick look interpretation, just double click the density-neutron x-plot under fluid folder. IP will automatically create a density-neutron x-plot for you. Please see the below image.
The abnormal density & neutron behavior is inside the green circle area. In that area, density value was quite low and neutron porosity value is also low. This zone may be possibly gas bearing. You may want to know which intervals at your well is possible gas bearing sands. Click the arrow with red circle on top of your x-plot.
Change the diameter of your circle to 85 and tick highlight point like below and click the area of interest;
Go back to your log and you should see something like this;
You can see there have some light red color shading in these two intervals. These two intervals probably be gas bearing reservoirs.
Happy Interpreting with IP 3.6
I will post more at a later time!
Stay tune & Have fun!!
Cheers!!
burmesegeologist
